Articles on: Device Installation

VX60 Install Guide

Every light to medium vehicle sized vehicle manufactured after 1996 is equipped with an On-Board-Diagnostics Port, otherwise known as an OBD or OBDII port.

Locate this port underneath the dashboard, generally under the steering column, and plug the VX60 directly into this port.



It is also important to note, when installing any GPS device, that the vehicle must be in 4G coverage, and not under cover, such as a garage, or carpark.

Once the device is plugged in, there should be red LED lights on the device, once the GPS and Network lights are solid, the device is ready. If the lights are not going solid, and instead, keep flashing, there may be a network or GPS issue. If so, please contact our support team.

OBDII Splitter Cable/Extension/Concealment Kit



If you have also purchased an OBDII Splitter Cable/Extension/Concealment Kit, please watch this video below which will show you a step by step guide on how to install it.



Note: Vehicle manufacturers sometimes use different types of OBDII plugs, to make the process simple, we offer a universal adapter kit, you can also read more here: https://kb.linxio.com/en/articles/8184746-universal-obdii-y-splitter-extension-cable-installation

Updated on: 25/02/2025

Was this article helpful?

Share your feedback

Cancel

Thank you!