BMA seatbelt installation for TR500 BLE

Note: Before proceeding, please ensure the TR500-12 is installed according to the install guide here: https://kb.linxio.com/en/article/tr500-12-install-guide-vm55af/

Seatbelt can be connected to the seatbelt connector, below is an example:

And can be connected to any of the following:

Ideally, set it to Din2. It's a simple 1 or 0, so min voltage is anything >+0.1V

This can then be set as a Digital I/O Event with Logs:

Updated on: 19/06/2025